back
to top
Add to wish list Path

Lyze chair teak wood set of 2 - price per chair by Emu

For the Lyze collection, Florent Coirier was inspired by a technical and timeless design that makes this furniture group elegant and contemporary. The unusual stainless steel backrest is connected to the aluminum seat and is available in various sophisticated color combinations. The coffee tables with fiber cement top and the comfortable lounge chair elegantly furnish leisure areas in all environments.

Loading...

additional 5 % discount for prepayment

Label
Emu
Designer*in

Florent Coirier

Material

Teak
Aluminum
Steel

Mass

L: 47 cm / W: 54 cm / H: 79 cm
Seat height: 45 cm

Weight

4.8 kg

Note

Maintenance and care instructions:

Aluminum:
To keep the product in good condition for a long time, we advise regular, correct cleaning, which should be particularly frequent in places with high humidity and marine climates. We recommend cleaning the surfaces with water or neutral detergents and a soft cloth. Prolonged, uninterrupted exposure of aluminum products to strong UV radiation or very low temperatures may adversely affect the original properties of the polyester paint coating. We recommend cleaning the products when they are not used for long periods and in winter and storing them in a protected place.

Steel:
To keep the product in good condition for a long time, we recommend storing it in closed, dry rooms in winter to prevent condensation. If the products are stored near the sea, we recommend cleaning the metal surfaces with water or detergent and a soft cloth every three months before the start of winter and protecting them with Vaseline oil or car wax. Rinse with plenty of water. Avoid the use of abrasive cleaning agents and brushes. On painted surfaces, regular waxing of the frame with high-quality car wax or a commercially available protective product is recommended to help maintain or restore the surface gloss of the paintwork. Protective products are available from hardware stores or similar outlets. Caution at sea: When used in a marine environment, salt can accumulate in "crevices" on the product and quickly attack the paintwork from there. In a swimming pool environment, on the other hand, chlorine can accumulate on the coating and damage it. In both environments, repeated condensation and evaporation processes can lead to the accumulation of these corrosive and aggressive substances, particularly in crevices on the product. Regular cleaning with mild, biodegradable liquid soap and water will ensure that these concentrated deposits are removed and the surface coating of the furniture is protected in accordance with the instructions above. Maintenance interval: - Aggressive environment (sea, industrial areas, swimming pools): every 3 months; - Average environment (urban areas): every 6 months; - Low pollution environment (rural areas): every 12 months. In the case of tables, it is advisable not to put them away with the table tops in direct contact with each other and to store them in dry, well-ventilated places to avoid the formation of condensation.

Teak:
As it is a natural material, changes in color and, depending on humidity and temperature fluctuations, the formation of cracks may occur. However, if the wood is not treated with conventional or special oil-based products, a silver-grey patina will form on the surface, which can also be removed by lightly sanding the surface and then polishing with a jute cloth. Small stains from oil or other food products on the surface must be removed quickly before they penetrate deep into the wood by sanding the affected surface and polishing with a jute cloth. When the wood gets wet for the first time, it is normal for the surface to become a little rough after drying. The original smoothness can be restored by lightly sanding the surface and then polishing it with a jute cloth.

Scope of delivery

Set consisting of 2 chairs in the same color

Design / Made In

Italy