Plus4 Extendable table rectangular Balcony - 120 by Emu

The Plus4 collection consists of an extendable table, the new Balcony and Imperial Plus4 tables. The table top is made of press-bent metal, which is processed with special care for an aesthetically pleasing result. The design of the rails for extending the table top was specially created by EMU. Thanks to the butterfly extension of the extension stored inside the table, the table can be extended in a few simple steps. Compared to a traditional extendable table top, the 110 cm extension can be used to create 4 additional seats instead of the usual 2, which considerably extends the possible uses of this product. In addition, the table extension has been designed so that every seat guarantees legroom. The table legs are available in both round and conical versions.

To keep the product in good condition for a long time, we recommend storing it in closed, dry rooms in winter to prevent condensation. If the products are stored near the sea, we recommend cleaning the metal surfaces with water or detergent and a soft cloth every three months before the start of winter and protecting them with Vaseline oil or car wax. Rinse with plenty of water. Avoid the use of abrasive cleaning agents and brushes. On painted surfaces, regular waxing of the frame with high-quality car wax or a commercially available protective product is recommended to help maintain or restore the surface gloss of the paintwork. Protective products are available from hardware stores or similar outlets. Caution at sea: When used in a marine environment, salt can accumulate in "crevices" on the product and quickly attack the paintwork from there. In a swimming pool environment, on the other hand, chlorine can accumulate on the coating and damage it. In both environments, repeated condensation and evaporation processes can lead to the accumulation of these corrosive and aggressive substances, particularly in crevices on the product. Regular cleaning with mild, biodegradable liquid soap and water will ensure that these concentrated deposits are removed and the surface coating of the furniture is protected in accordance with the instructions above. Maintenance interval: - Aggressive environment (sea, industrial areas, swimming pools): every 3 months; - Average environment (urban areas): every 6 months; - Low pollution environment (rural areas): every 12 months. In the case of tables, it is advisable not to put them away with the table tops in direct contact with each other and to store them in dry, well-ventilated places to avoid the formation of condensation.